Mold exists everywhere. We share the planet with mold and mold outside is good, but mold inside can be bad.
Mold and poor indoor air quality can happen in any home, especially since it can lie dormant for years until the correct conditions for growth occur.
Testing and remediation of mold is important because some people may have severe reactions to different species of molds.
Getting reliable answers about the air quality in your home is simple with All Florida AmeriSpec.
As Florida’s trusted home inspection provider, we’ve performed more than 100,000 inspections over the last 35 years.
Our licensed and certified inspectors use state-of-the-art tools and nationally recognized standards to test for mold and lay out the next steps you should take.
Mold can be harmful in different ways to different people because there are so many different species and each individual person can have a different reaction based on their own biological makeup. People who have asthma, a compromised immune system (including cancer), elderly, children, and allergies to mold are at highest risk for reaction to molds.
A few of the most noteworthy health problems caused by mold include:
These potential hazards are particularly worrying because people can be exposed to mold in several ways, including:
Over half of the homes in Florida have been compromised from water intrusions. Think about a leaky faucet or a toilet overflowing, something as simple as that. If the water hasn’t dried properly then it could lead to mold growth.
Testing for Mold isn’t just about uncovering a hidden problem — it’s also about giving your family peace of mind. Among other things, professional mold testing can:
Contact All Florida AmeriSpec today to have your home tested and start enjoying these benefits.
Our goal is to give you clear, reliable answers about the presence of Mold in your home.
To do this, we start by inspecting the home and determining where the issues may be. We do a baseline test on the exterior of the house and compare it to the testing inside the house. Then we collect air samples per a minimum of one per 1000 sqft of the home and one per HVAC system. These samples are submitted to a certified laboratory for analysis. We can also do swab and tape tests for mold as needed during the inspection if our inspector determines it is necessary.
Note that every time we collect air samples, there will be some sort of organic material read on the sample taken, such as dander, insects, dust, or other organic compounds. This is not an immediate concern, which is why our inspectors analyze this data and send it off to a lab before alerting the homeowner of a concern. Our detailed post-inspection report includes all of the data that you need to know about the air quality in your home, whether there is concern for poor air quality and mold or not.
We’ll collect one air sample per 1000 square ft and per HVAC system, as well as the outside test for baseline air quality and compare it to the indoor tests, and can collect swap and tape tests as needed.
We’ll compare the results to the baseline tests for safe comparison for your home’s specific environmental needs.
We’ll deliver a detailed report and go over findings with the client and they will have direct access to our industrial hygienist from the lab that can go over next steps for mitigation with them if needed.
Unlike some other inspection services, we don’t leave you with raw data and confusing results. You’ll receive a professional evaluation, a clear explanation of the risks, and a list of the next steps you’ll want to complete to move forward with confidence.
When it comes to protecting your family from the dangers of poor air quality and mold, experience and trust matter. That’s why All Florida AmeriSpec brings both those things, as well as the industry’s highest credentials to every inspection.
Some of the leading reasons to choose us include:
With over 35 years in business and more than 100,000 inspections completed, we’ve seen it all and know how to spot risks that less-experienced providers might miss.
Our inspectors are ASHI, ICC, and InterNACHI Certified and fully licensed in Florida, so you can feel confident that your testing meets or exceeds professional standards.
You’ll receive easy-to-understand results that provide you with the practical guidance you need to ensure your home is safe if hazards are found.
We combine our deep understanding of Florida home construction trends with the resources of the nationally recognized AmeriSpec brand.
Contact All Florida AmeriSpec and enjoy the peace of mind that only decades of experience and industry-leading expertise can provide.
Whether you’re a realtor, homeowner, or prospective buyer, you certainly want your inspection to be as smooth and useful as possible. So, try to embrace the following tips before, during, and after your All Florida AmeriSpec air quality inspection:
Still have questions about air quality and mold testing? Curious to learn more about All Florida AmeriSpec’s services? We’ll answer some of the most common questions our customers have below.
The costs associated with air quality and mold testing can vary depending on each home, but the most common range is between $295-500.
Specific signs for mold in the home include visible mold spores, water damage and moisture problems, high indoor humidity, and HVAC and ventilation issues. All of these point to a need for your home to be tested for mold.
Home mold tests are on the market, but the most accurate ones still need to be sent to a lab. They are not very accurate and can give incomplete or false results. They cannot tell you what kind of mold is in the air, and cannot tell you what next steps are necessary if there is mold in your home.
Yes, all homes can have mold. Mold grows everywhere on Earth and is part of every ecosystem.
Small areas of mold in bathrooms, under sinks, or isolated areas can be removed; however, we highly recommend seeking professional help removing mold.
No. Bleach does not contain the chemical properties to break down and kill mold as the licensed fungicides that mold mitigation professionals use.
service areas
All Florida AmeriSpec proudly provides lead-based paint testing services in the following locations across the Sunshine State:
Apollo Beach, Bloomingdale, Brandon, Bradenton, Carrollwood, Citrus St. Pete Park, Clearwater, Dover, Dunedin, Fishhawk Gibsonton, Hudson, Hyde Park Lakeland, Lakewood Ranch, Land O’ Lakes, Lutz, New Port Richey, New Tampa, Odessa, Palm Harbor, Palmetto, Parish, Plant City, Riverview, Ruskin, Safety Harbor, St. Petersburg, Sarasota, Seffner, Sun City Center, Tampa, Tampa Palms, Temple Lerrace, Thonotosassa, Valrico, Wesley Chapel, Westchase, Ybor City, Zephyrhills
Know the facts before you sign. Our independent inspectors deliver straightforward results you can act on.
